Manitowoc Ice Indoor Furnishings 7623123 User Manual

7623123  
WATER CURTAIN SWITCH UPDATE KIT  
USED ON G-1200 AND G-1700 SERIES ICE MACHINES  
Kit Includes: 2 springs, P/N 3300113  
2 brackets, P/N 6268714  
The water curtain spring, installed, will increase the return  
strength of the water curtain switch arm.  
The new switch activating bracket is made out of a lighter gauge  
stainless steel for easier mobility.  
INSTALLATION INSTRUCTIONS:  
1. Disconnect power supply.  
2. Remove the left-hand side panel.  
3. Remove the actuator retainers and switch activating brackets by removing the screws  
supporting them (one in each, front and rear).  
4. Remove the two screws supporting the switch mounting bracket and pull out the bracket  
and switch assembly. Using needle-nose pliers, install the supplied springs into each  
water curtain switch (one in each, front and rear), as shown in Fig. 2.  
5. Reassemble the bracket and switches in their original positions.  
6. Replace the switch activating brackets with the new ones supplied (front and rear).  
Reassemble the actuator retainers, with the new switch activating bracket, in their  
original positions. Note: All parts must be burr free.  
7. Readjust the water curtain switches for proper operation, as necessary. See these  
instructions on the inside of the front panel.  
Manitowoc Ice, Inc.  
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8003553  
Rev. 10/09/03  
 

KVH Industries Satellite TV System TracVision User Manual
Kyocera All in One Printer FS 1800 User Manual
Lathem Time Clock 5000E Plus User Manual
LG Electronics Computer Drive HT762TZW User Manual
LOREX Technology Security Camera LW2201 User Manual
Makita Cordless Saw SR1800 User Manual
Makita Drill HR4001C User Manual
Makita Paint Sprayer BVF104 User Manual
McCulloch Chainsaw MCC1514 User Manual
McCulloch Lawn Mower 966564101 User Manual